Aluminum Trim Pieces

J Cap

$39
- Slides on to provide finished edge
- Opening: 1/16" (0.063")
- Does NOT fit any diamond plate
- Length: 93"
- Non-returnable
HE80
J Cap

$39
- Slides on to provide finished edge
- Opening: 3/32" (0.093")
- Fits 0.045" thick (17GA) diamond plate
- Length: 93"
- Non-returnable
HE82
Joiner

$59
- Slides on to cover seam
- Opening: 1/16" (0.063")
- Does NOT fit any diamond plate
- Length: 93"
- Non-returnable
HE94
Joiner

$59
- Slides on to cover seam
- Opening: 3/32" (0.093")
- Fits diamond plate 0.045" thick (3/64", 17GA)
- Fits diamond plate 0.063" thick (1/16", 14GA)
- Length: 93"
- Non-returnable
HE110
J Cap

$39
- Slides on to provide finished edge
- Opening: 1/8" (0.125")
- Fits 1/16" thick (14GA, 0.063") diamond plate
- Length: 93"
- Non-returnable
HE901
Joiner

$59
- Slides on to cover seam
- Opening: 5/32" (0.156")
- Fits diamond plate 0.080" thick (5/64", 12GA)
- Length: 93"
- Non-returnable
HE103
J Cap

$39
- Slides on to provide finished edge
- Opening: 3/16" (0.187")
- Fits 1/8" thick (8GA, 0.125") diamond plate
- Length: 93"
- Non-returnable
HE72
J Cap

$39
- Slides on to provide finished edge
- Opening: 1/4" (0.250")
- Fits 3/16" thick (5GA, 0.187") diamond plate
- Length: 93"
- 3/32" diameter holes (0.093"Ø) punched an slotted on back face
- Non-returnable
HE401
Inside Corner

$59
- Provides finished inside corner
- Opening: 1/16" (0.063")
- Does NOT fit any diamond plate
- Length: 93"
- Non-returnable
HE98
Outside Corner

$59
- Provides finished outside corner
- Opening: 1/16" (0.063")
- Does NOT fit any diamond plate
- Length: 93"
- Non-returnable
HE93
Inside Corner

$59
- Slides on to provide finished edge
- Opening: 3/32" (0.093")
- Fits 0.045" thick (17GA) diamond plate
- Length: 93"
- Non-returnable
HE85
J Cap

$59
- Slides on to provide finished edge
- Opening: 5/16" (0.312")
- Fits 1/4" thick (2GA, 0.250") diamond plate
- Length: 93"
- Non-returnable
HE402
J Cap

$59
- Slides on to provide finished edge
- Opening: 1/4" (0.250")
- Length: 93" *3/32" diameter holes (0.093"Ø) punched an slotted on back face
- Non-returnable
HE544
J Cap

$59
- Slides on to provide finished edge
- Opening: 3/8" (0.375")
- Length: 93"
- Non-returnable
HE5240
J Cap

$59
- Slides on to provide finished edge
- Opening: 1/2" (0.500")
- Length: 93"
- Non-returnable
HE1998
Joiner

$79
- Slides on to cover seam
- Opening: 0.197"
- Fits 1/8" thick (8GA, 0.125") diamond plate
- Length: 93"
- Non-returnable
HE105