Multiple SlatWall panels can be connected side-by-side to create a continuous wall using our patent pending modular system. Any length wall can be achieved in this manner, especially long continuous back-drops useful for trade shows. Adjacent SlatWalls are connected together with our innovative braces. At each connection point between adjacent SlatWalls, the feet stick out 3" in the front and 12" in the back, thereby eliminating any tripping hazard. The left most edge and the right most edge of the assembled continuous wall have feet that stick out 12" in the front and 12" in the back. The display can be assembled and dis-assembled over and over again. Each bracing section ships assembled and never needs to be dis-assembled. 5 bolts generally attach the bracing to the sides of each SlatWall. Wing nuts tighten the bolts, thereby eliminating the need for any tools. 2 persons minimum are generally needed for assembly due to the size and weight of individual SlatWall panels. For example a 4"x8" panel can weigh 100 lbs.